Cyclone
A 'Cyclone' is sweeping into the UK from the direction of Chesterfield!. Well actually the 'Cyclone' is the latest design from Richard Naylor of Ajay Models, in Chesterfiled, Derbyshire.

Due for imminent release, the Cyclone is a sports rendition of the type of limited production aeroplanes seen on the air racing circuits of 1930's USA.

This very complete kit has a wingspan of 79" and is suitable for a wide range of engines, from .75 to 1.20 two strokes and .80 to 1.50 four strokes. In fact the prototype has been flying very successfully on a Laser 100.

The kit is of built up construction with fully cut balsa ribs forming a modified Clark Y section. Many other parts are supplied ready cut. The top decking, front and rear fuselage, are shaped from veneered cut foam. The kit also includes fibreglass moulded cowling, wheel spats and a comprehensive hardware pack, including all hinges, horns, fuel tank, screws, nuts & bolts etc. It even comes with a pilot, which is a nice touch. I really don't like to see pilotless aircraft! All you need to finish the model is glue and covering material.

Richard has report to us that the model flew pretty well straight off the building board, requiring only the smallest of trim modifications. The prototype has now clocked up many flying hours and is reported to be a stable flyer, yet fully aerobatic, with no vices.

The kit comes with a 9 page manual and a full size plan. Many items are also available as separate accessories should you need them.

Price: £145 (+p&p)
See contact details below.

The Hustler
The Hustler was released by Ajay Models in the middle of last year. It has been designed as a first low wing aerobatic model, the next step after your trainer!

It has a sturdy construction with many pre cut parts. The top decking, front and rear fuselage is cut from foam as are the 56" wings and covered with veneer.

The Hustler is suitable for .40 to .60 two stroke engines and weighs in at around 4½ to 5 lbs, yet is fully aerobatic, reportedly doing continuous vertical '8's on a .40! The model is supplied as a full kit including quality accessories. Alternatively it can be supplied as a plan pack. All preformed parts are available separately should they be required.

Prices:
Full Kit £75 (+p&p)
Standard Kit £65 (+p&p)
Plan Pack £45 (+p&p)

For more details and information please contact:
Ajay Models
99 Rupert Street,
Lower Pilsley,
Near Chesterfield,
Derbyshire.
S45 8DB

Website: www.ajaymodels.co.uk

Tel: 01246 857785
Fax: 01246 203655